Multi-instrument, multi-user CDS system

offers complete flexibility

Chromperfect 8 offers unrivaled levels of flexibility and is completely configurable to the customers requirements. This means it is the perfect solution for any multiple instrument laboratory, from small facilities with three or more chromatographs to laboratories with hundreds of users and instruments, who require the security and flexibility of a distributed chromatography data system. Freedom of choice when selecting hardware and software appropriate for the laboratory Chromperfect 8 is the only CDS that gives chromatographers complete freedom of choice when selecting hardware and software appropriate for the laboratory. Data acquisition and data acquisition/instrument control products are available to meet the needs of current and legacy instrumentation. Chemists experience a single user-friendly interface and is data are created in a common file format. This makes training and data transfer to the rest of the enterprise surprisingly simple.
Chromperfect Chromatography Software © 2020 - Chromperfect is a Registered Trade Mark of Justice Innovations Inc. dba Justice Laboratory Software * Some references may appear on this website to trademarks belonging to others not affiliated with Justice Innovations Inc, including references which may not display the ® symbol. All references to other trademarks belonging to third parties or referring to branded software or instruments, shall be understood to refer to those registered trademarks owned by others, and not to any trademark belonging to Justice innnovations Inc. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Privacy Policy
Agilent ICF acquisition supports a number of GC and LC instruments. Configuration Reporter to make handy printouts of the current Registry values. Sentry Service and its Monitor replace the four apps that we were supplying. Intended primarily for CP Unite, but supports CP Raw and Bound files too. Now each user has an optional "Analyst ID" field. Typically their initials go in this field so that the name in the report (which may go to a customer) need not be the user full name that appears at the top of CP forms. Now the actions taken by the Administrator are logged. For example, when a user account is created, deleted, or modified. There is a new log file, CPAdmin.log. Fixed bug causing Alternate Administrator to use the main Administrator's permission settings. New tab page for the Administrator Log report. New results form in the usual tradition. New archive button. The Use Windows Log on Name feature in Win10 has been fixed. Now the log-on name (and password) match the name in the Windows log on icon. Improved user feedback at log-on time if user's password soon to expire, and if bad passwords occurred since last successful log-on. Auto Method Name feature for ChemStation and other Unite files. Measure Noise dialog box now allows user to accept the suggested threshold immediately. Fixed bug causing Measure Noise to suggest a very large threshold. The message box that displays the RMS noise and suggests a threshold no has another button allowing the user to apply the suggested threshold immediately. New acquisition device for ICF instruments. New Scion acquisition. CPAcqService now supports automatic processing. There are new columns in the Connection spreadsheet. New support for synthetic Raw files. Now much easier to make a set of similar files. New editing form for ICF Set-point files. New smoothing choices: Savinsky-Golay smoothing (three levels), first and second derivatives. Calibration file printout now lists weird curve warnings. M68 Setpoint Editor now works even where there are commas and periods in numbers. New peak table row option: all components in selected groups. New peak table items, related to number of peaks under search windows instead. For nested search windows. Undocumented header code #fn decorates Bound file name with Code128 start and stop characters. This feature supports bar-codes in reports. Fixed bug in CP Traffic causing failure to terminate when you click the close box. This was a "feature" in CP 6.0 which has been improved. New improved spreadsheet throughout the software. Improved user interface including revised start bar an upgrade tool bar buttons. New PDF driver improved for Windows 10. New license options for companies that can not use USB devices. New solution files offer a “container” which holds method, calibration and reports. Improved Menu with support for Windows screen scaling. Improved graphic file export. Now in Analyze selecting a peak will show a calibration plot for that component. Now supports segmented plots where a single chromatogram is broken into segments of a given size, and displayed in what looks like an overlay plot. Improved plot control that no longer loses focus. Improvement in overlay plots Now the user may set the active chromatogram, the stagger, and whether all traces should be labeled, or only the active chromatogram. When overlay plots list the file names and/or sample names in the legend above the plot, they no longer appear in the reverse order as compared to the staggered chromatograms. Many performance and stability improvements. Data acquisition improvements Delay time setting offsets the time axis. If the Suppress Acquisition checkbox checked, then no Raw file for that channel. User can now use a button to reset the acquisition spreadsheet to the default. New feature to “re-connect” to digital instruments. Improved acquisition for USB Tigre interfaces with Hum suppression. Method files can be limited to a particular detector, not just the instrument. The File Editor now lets the user select which tab pages to include in the Method file printout. Create Excel spreadsheet with area file information automatically with data acquisition. Added support for making new Sequence files from comma-separated ASCII files. Make sequence files directly from Excel spreadsheets Sequence files now have the Creator and Description fields. The M68 Editor (6890 and 6850) now supports OI Analytical's model #4430 PID Formated reports now support fractional spacing in the header section. Format file now support. custom printers and over-ride default printer name. Up to eight custom printers can be specified in the User Manager. Extra reports can be generated by specifying the Format file in a special User Field in the Sequence file or Download form. Formatted reports now support accents, degree symbols, and the like inside Included files and InStep ISR files. Formatted reports for Sequence files now support four new header codes, which display the new Creator and Description properties, the number of channels, and the number of entries. Better PDF support for non-US customers as files were formerly hard- coded as US Letter. Now they pay attention to the Paper Size setting in the Page Setup dialog.

New Features for Chromperfect 8

Multi-instrument, multi-user CDS system offers

complete flexibility

Chromperfect 8 offers unrivaled levels of flexibility and is completely configurable to the customers requirements. This means it is the perfect solution for any multiple instrument laboratory, from small facilities with three or more chromatographs to laboratories with hundreds of users and instruments, who require the security and flexibility of a distributed chromatography data system. Freedom of choice when selecting hardware and software appropriate for the laboratory Chromperfect 8 is the only CDS that gives chromatographers complete freedom of choice when selecting hardware and software appropriate for the laboratory. Data acquisition and data acquisition/instrument control products are available to meet the needs of current and legacy instrumentation. Chemists experience a single user-friendly interface and is data are created in a common file format. This makes training and data transfer to the rest of the enterprise surprisingly simple.

For larger laboratories with

multiple instruments and users

Chromperfect Chromatography Software © 2020 - Chromperfect is a Registered Trade Mark of Justice Innovations Inc. dba Justice Laboratory Software * Some references may appear on this website to trademarks belonging to others not affiliated with Justice Innovations Inc, including references which may not display the ® symbol. All references to other trademarks belonging to third parties or referring to branded software or instruments, shall be understood to refer to those registered trademarks owned by others, and not to any trademark belonging to Justice Innnovations Inc. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Privacy Policy

New Features for Chromperfect 8

Agilent ICF acquisition supports a number of GC and LC instruments. Configuration Reporter to make handy printouts of the current Registry values. Sentry Service and its Monitor replace the four apps that we were supplying. Intended primarily for CP Unite, but supports CP Raw and Bound files too. Now each user has an optional "Analyst ID" field. Typically their initials go in this field so that the name in the report (which may go to a customer) need not be the user full name that appears at the top of CP forms. Now the actions taken by the Administrator are logged. For example, when a user account is created, deleted, or modified. There is a new log file, CPAdmin.log. Fixed bug causing Alternate Administrator to use the main Administrator's permission settings. New tab page for the Administrator Log report. New results form in the usual tradition. New archive button. The Use Windows Log on Name feature in Win10 has been fixed. Now the log-on name (and password) match the name in the Windows log on icon. Improved user feedback at log-on time if user's password soon to expire, and if bad passwords occurred since last successful log-on. Auto Method Name feature for ChemStation and other Unite files. Measure Noise dialog box now allows user to accept the suggested threshold immediately. Fixed bug causing Measure Noise to suggest a very large threshold. The message box that displays the RMS noise and suggests a threshold no has another button allowing the user to apply the suggested threshold immediately. New acquisition device for ICF instruments. New Scion acquisition. CPAcqService now supports automatic processing. There are new columns in the Connection spreadsheet. New support for synthetic Raw files. Now much easier to make a set of similar files. New editing form for ICF Set-point files. New smoothing choices: Savinsky-Golay smoothing (three levels), first and second derivatives. Calibration file printout now lists weird curve warnings. M68 Setpoint Editor now works even where there are commas and periods in numbers. New peak table row option: all components in selected groups. New peak table items, related to number of peaks under search windows instead. For nested search windows. Undocumented header code #fn decorates Bound file name with Code128 start and stop characters. This feature supports bar-codes in reports. Fixed bug in CP Traffic causing failure to terminate when you click the close box. This was a "feature" in CP 6.0 which has been improved. New improved spreadsheet throughout the software. Improved user interface including revised start bar an upgrade tool bar buttons. New PDF driver improved for Windows 10.
New license options for companies that can not use USB devices. New solution files offer a “container” which holds method, calibration and reports. Improved Menu with support for Windows screen scaling. Improved graphic file export. Now in Analyze selecting a peak will show a calibration plot for that component. Now supports segmented plots where a single chromatogram is broken into segments of a given size, and displayed in what looks like an overlay plot. Improved plot control that no longer loses focus. Improvement in overlay plots Now the user may set the active chromatogram, the stagger, and whether all traces should be labeled, or only the active chromatogram. When overlay plots list the file names and/or sample names in the legend above the plot, they no longer appear in the reverse order as compared to the staggered chromatograms. Many performance and stability improvements. Data acquisition improvements Delay time setting offsets the time axis. If the Suppress Acquisition checkbox checked, then no Raw file for that channel. User can now use a button to reset the acquisition spreadsheet to the default. New feature to “re-connect” to digital instruments. Improved acquisition for USB Tigre interfaces with Hum suppression. Method files can be limited to a particular detector, not just the instrument. The File Editor now lets the user select which tab pages to include in the Method file printout. Create Excel spreadsheet with area file information automatically with data acquisition. Added support for making new Sequence files from comma-separated ASCII files. Make sequence files directly from Excel spreadsheets Sequence files now have the Creator and Description fields. The M68 Editor (6890 and 6850) now supports OI Analytical's model #4430 PID Formated reports now support fractional spacing in the header section. Format file now support. custom printers and over-ride default printer name. Up to eight custom printers can be specified in the User Manager. Extra reports can be generated by specifying the Format file in a special User Field in the Sequence file or Download form. Formatted reports now support accents, degree symbols, and the like inside Included files and InStep ISR files. Formatted reports for Sequence files now support four new header codes, which display the new Creator and Description properties, the number of channels, and the number of entries. Better PDF support for non-US customers as files were formerly hard-coded as US Letter. Now they pay attention to the Paper Size setting in the Page Setup dialog.